Epson AcuLaser CX37DNF - Manual (Page 164)

Item Description
Authentication
Algorithm for ESP When ESP is selected for Security Protocol, specify the ESP authentication algorithm.
Choices: None, MD5, SHA-1
Default: None
Authentication
Algorithm for AH When AH is selected for Security Protocol, specify the AH authentication algorithm.
Choices: MD5, SHA-1
Default: MD5
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Cancel button Click to cancel the entered data and return to the Network - TCP/IP - IPsec page.
IPsec (IPsec Peer Settings)
Item Description
No. Displays the number (No.) to be registered.
Perfect Forward Secrecy To increase the IKE strength, select Use.
Choices: Not Use, Use
Default: Not Use
Peer’s Address Specify the IP address of the peer.
Range: 2 to 39 bytes
Note:
An IPv4 or IPv6 address can be specified.
Pre-Shared Key Specify the Pre-Shared Key text shared with the peer.
Range: Up to 64 bytes
Encapsulation Mode Specify the operation mode of IPsec.
Choices: Not Use, Tunnel Mode, Transport Mode
Default: Not Use
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Cancel button Click to cancel the entered data and return to the Network - TCP/IP - IPsec page.
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 164