Epson AcuLaser CX37DNF - Manual (Page 123)

Paper Source Settings
Item Description
Tray1 Paper Size Specifies the setting for the size of paper loaded into Tray 1.
Default: A4
Configuration Menu Equivalent:
UTILITY
- PAPER SETUP - TRAY1 PAPER
Width Specifies the paper width when Paper Size is set to Custom
Size.
Range: 3.63 - 8.50 (inch) / 92 - 216 (mm)
Configuration Menu Equivalent:
UTILITY
- PAPER SETUP - TRAY1 PAPER
Length Specifies the paper length when Paper Size is set to Custom
Size.
Range: 5.83 - 14.00 (inch) / 148 - 356 (mm)
Configuration Menu Equivalent:
UTILITY
- PAPER SETUP - TRAY1 PAPER
Paper Type Specifies the setting for the type of paper loaded into Tray 1.
Choices: Plain Paper, Thick 1, Thick 2, Label, Envelope,
Postcard, Letterhead, Glossy 1, Glossy 2, Single Side Only,
Special Paper
Default: Plain Paper
Configuration Menu Equivalent:
UTILITY
- PAPER SETUP - TRAY1 PAPER
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 123