Epson AcuLaser CX37DNF - Manual (Page 180)

Item Description
Port Number Specifies the port number communicating with the SMTP server.
Range: 1 - 65535
Default: 25
Connection
Timeout Select the amount of time (in seconds) until the connection with the SMTP server
times out.
Range: 30 - 300 (seconds)
Default: 60
Text Insert Select whether or not text is inserted into the body of the e-mail message when
sending e-mail with a Scan to E-mail operation.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - E-MAIL SETTING - TEXT INSERT
Authentication POP before
SMTP If Enable is selected, POP before SMTP is enabled.
Choices: Enable, Disable
Default: Disable
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - E-MAIL SETTING - POP BEFORE SMTP -
DISABLE/ENABLE
POP before
SMTP Time Specify the time period to access the SMTP server after logging in to the POP
server.
Range: 0 - 60 (in seconds)
Default: 1
POP3 Server
Address Type in the host name or IP address for the POP3 server used for authentication
with POP before SMTP.
Range: Up to 64 characters
Default: 0.0.0.0
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - E-MAIL SETTING - POP BEFORE SMTP - POP3
SERVER ADDR.
Account Name Type in the account name used for POP3 server.
Range: Up to 63 characters
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - E-MAIL SETTING - POP BEFORE SMTP - POP3
ACCOUNT
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 180