Epson AcuLaser CX37DNF - Manual (Page 39)

5. In Administrator mode of Web-Based EpsonNet Config, select NetWare from the Network tab,
and then specify the following settings.
❏ NetWare Print: Select Enable.
❏ Frame Type:
Select Auto. (Select the frame type according to the network environment.)
❏ Mode: Select NPrinter/RPrinter.
❏ Printer Name:
Specify the printer name. (Default: AL-CX37-xxxxxx)
❏ Printer Number:
Specify the printer number (0-255). When 255 is specified, the setting is Auto.
6. Restart the printer.
7. Use the NetWare server console to load PSERVER.NLM.
8. Use the NetWare server console to display the print server screen, and then check that created
printer is shown as Waiting for Job for the connected printer (0).
For NetWare 4.x/5.x/6 Print Server Mode (NDS)
Note:
To use the Print Server mode, the IPX protocol must be loaded on the NetWare server.
1. Log on to NetWare as an administrator from a client computer.
2. Start up NWadmin.
3. Select either the organization or organizational unit container that offers the print service, and
then click Print Services Quick Setup (non-NDPS) on the Tools menu.
4. Enter the appropriate names in the Printer Server Name, Printer Name, Print Queue Name, and
Print Queue Volume fields, select Other/ Unknown from the Printer Type field, and then click
the Create button.
Note:
For queue user privileges, printer notification option, assignment of multiple queues, and passwords,
refer to the NetWare documentation, and specify settings as necessary.
Epson AcuLaser CX37 Series Reference Guide
Operation on NetWare 39