Epson AcuLaser CX37DNF - Manual (Page 150)

Item Description
Reduction RX Select whether documents longer than the paper are printed reduced, split, or
discarded.
If On is selected, received faxes are printed reduced.
If Off is selected, received faxes are printed at full size and split onto multiple
pages.
If Cut is selected, received faxes are printed while erasing any part that does not fit
within the page. However, when sending a document more than 24 mm (1 inch)
longer than the paper, Cut is not available. (In this case, the document is split.)
Choices: On, Off, Cut
Default: On
Configuration Menu Equivalent:
UTILITY
- FAX RX OPERATION - REDUCTION RX
RX Print Select whether the fax is printed only after all document pages have been
received or printing begins as soon as the first page of the document is received.
If Memory RX is selected, printing begins after all pages have been received.
If Print RX is selected, printing begins after the first page has been received.
Choices: Memory RX, Print RX
Default: Memory RX
Configuration Menu Equivalent:
UTILITY
- FAX RX OPERATION - RX PRINT
RX Mode Select the reception mode.
Choices: Auto RX, Manual RX
Default: Auto RX
Configuration Menu Equivalent:
UTILITY
- FAX RX OPERATION - RX MODE
Forward Mode Select the forwarding mode.
Choices: Off, On, On(Print)
Default: Off
Configuration Menu Equivalent:
UTILITY
- FAX RX OPERATION - FORWARD
Forward Address Specify the forwarding address for fax or e-mail.
Range: Up to 50 characters (Fax), 64 characters (E-mail)
Configuration Menu Equivalent:
UTILITY
- FAX RX OPERATION - FORWARD
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 150