Epson AcuLaser CX37DNF - Manual (Page 163)

Item Description
IPsec SA Life Time Specifies the IPsec SA Life Time (in seconds).
Range: 120-604800
Default: 3600
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Cancel button Click to cancel the entered data and return to the Network - TCP/IP - IPsec page.
IPsec (IKE Settings)
Item Description
No. Displays the number (No.) to be registered.
Encryption Algorithm Select the encryption algorithm to be used when creating a control tunnel.
Choices: DES-CBC, 3DES-CBC
Default: DES-CBC
Authentication
Algorithm Select the authentication algorithm to be used when creating a control tunnel.
Choices: MD5, SHA-1
Default: MD5
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Cancel button Click to cancel the entered data and return to the Network - TCP/IP - IPsec page.
IPsec (IPsec SA Settings)
Item Description
No. Displays the number (No.) to be registered.
Security Protocol Select the security protocol.
Choices: AH, ESP, ESP & AH
Default: AH
Encryption Algorithm for
ESP When ESP is selected for Security Protocol, specify the ESP encryption algorithm.
Choices: None, DES-CBC, 3DES-CBC, AES-CBC, AES-CTR
Default: None
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 163