Epson AcuLaser CX37DNF - Manual (Page 149)

Item Description
Header Select whether or not the transmission information (date sent, sender's name, fax
number, etc.) is printed on sent faxes.
Choices: On, Off
Default: On
Configuration Menu Equivalent:
UTILITY
- FAX TX OPERATION - HEADER
Note:
If User Setting - Fax PTT Setting is set to Korea, no setting other than On can be
selected, therefore, this parameter does not appear.
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Reception Operation
Item Description
Memory RX Mode Select whether to allow (On) memory reception or not (Off). Select On not to print
when receiving confidential faxes or when no one is around, for example, at
night. The received document can be stored in the memory and printed at a
specified time or when memory reception is set to Off. A password can be set to
specify the starting time or ending time of memory reception, or to cancel the
function. The set of starting time and ending time are valid every day until
memory reception is turned off.
Choices: Off, On
Default: Off
❏ On Time
Range: 00:00 to 23:59
❏ Off Time
Range: 00:00 to 23:59
❏ Password
Range: 0000 to 9999
Configuration Menu Equivalent:
UTILITY
- FAX RX OPERATION - MEMORY RX MODE
Number of Rings Specify the number of rings that are sounded.
Range: 1 to 16
Default: Depending on country setting
Configuration Menu Equivalent:
UTILITY
- FAX RX OPERATION - NO. of RINGS
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 149