Epson AcuLaser CX37DNF - Manual (Page 159)

Item Description
Search Domain Name
Automatic Acquisition Select whether or not the DNS search domain name is automatically acquired from the
DHCPv6 server to overwrite the current setting.
Choices: Enable, Disable
Default: Enable
NTP Server Automatic
Acquisition Select whether or not the NTP server address is automatically acquired from the DHCPv6
server to overwrite the current setting.
Choices: Enable, Disable
Default: Enable
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
RAW Port Settings
For more information on these TCP/IP, see Chapter 5 “Network Printing” on page 61.
Item Description
RAW Port Select whether or not RAW port is used.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - NETWORK SETTING - RAW PORT - DISABLE/ENABLE
RAW Port Number Identifies the number of the printer’s RAW port.
Choices: 1 - 65535
Default: 9100
Note:
The currently used port number and numbers 80, 161, 427, 443, 515, 631 and 4567 cannot
be specified.
RAW Port Bidirectional Select whether or not the RAW Port bidirectional is used.
Choices: Enable, Disable
Default: Disable
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - NETWORK SETTING - RAW PORT - BIDIRECTIONAL
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 159