Epson AcuLaser CX37DNF - Manual (Page 182)

SMB
Send SMB
Item Description
Send If Enable is selected, SMB transmission is enabled.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - NETWORK SETTING - SMB
NTLM Setting Select the version of NTLM Setting.
Choices: v1, v2, v1/v2
Default: v1
User Authentication Select whether or not NTLM user authentication is performed.
Choices: On, Off
Default: On
DFS To perform SMB transmission in a distributed file system (DFS) environment,
select Enable.
Choices: Enable, Disable
Default: Enable
Apply button Applies the configuration settings in this window.
Clear button Resets all configuration settings to previous values.
Direct Hosting Settings
Item Description
Direct Hosting Settings Select whether or not Direct Hosting of SMB is used. To use IPv6 addresses for
communication, select Enable.
Choices: Enable, Disable
Default: Enable
Apply button Applies the configuration settings in this window.
Clear button Resets all configuration settings to previous values.
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 182