Epson AcuLaser CX37DNF - Manual (Page 179)

Email
Send Email
Item Description
E-mail SMTP If Enable is selected, sending Email is enabled.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - E-MAIL SETTING - SMTP
Scan Sending If Enable is selected, scan sending is enabled.
Choices: Enable, Disable
Default: Enable
E-mail Address Specify the name of the E-mail sender when using network scanning.
Range: Up to 20 characters
Default: Epson AL-CX37
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - E-MAIL SETTING - E-MAIL ADDRESS
Sender Name Specify the E-mail address of the sender when using network scanning.
Range: Up to 64 characters
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - E-MAIL SETTING - SENDER NAME
Note:
If the E-mail Address text box remains blank when the Apply button is clicked, an
error appears. Be sure to specify an appropriate setting.
Default Subject Specify the subject of the E-mail message when using network scanning.
Range: Up to 20 characters
Default: From Epson AL-CX37
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - E-MAIL SETTING - DEFAULT SUBJECT
SMTP Server
Address Specifies the IP address or host name for the SMTP server.
Range: Up to 64 characters
Default: 0.0.0.0
Note:
When specifying a setting for SMTP Server Address, also specify a setting for
E-mail Address.
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 179