Epson AcuLaser CX37DNF - Manual (Page 126)

Item Description
Tray Chaining Tray Chaining If Enable is selected and the specified paper tray runs out of
paper during printing, a paper tray loaded with paper of the
same size is automatically selected so printing can continue.
If Disable is selected and the specified paper tray runs out of
paper, printing stops.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
PS/PCL PRINT
- PAPER MENU - TRAY CHAINING
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Tray Mapping Settings
Item Description
Tray Mapping Mode Select whether or not the Tray Mapping function is used.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
PS/PCL PRINT
- PAPER MENU - TRAY MAPPING - TRAY MAPPING MD.
Logical Tray 0-9 Select the tray that is used for printing when a print job is received from another
manufacturer’s printer driver.
The default setting for Logical Tray 1 is Physical Tray 1. The default setting for all
other trays is Physical Tray 2.
Choices: Physical Tray 1, Physical Tray 2, Physical Tray 3
Configuration Menu Equivalent:
PS/PCL PRINT
- PAPER MENU - TRAY MAPPING - LOGICAL TRAY0-9
Note:
Physical Tray 3 appears only if an optional 500-sheet paper cassette unit is
installed.
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 126