Epson AcuLaser CX37DNF - Manual (Page 157)

Item Description
Subnet Mask* Sets the printer’s subnet mask address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
Note:
If the specified subnet mask address is outside of the allowable range, the value is not
changed, even after the Apply button is clicked. The setting returns to the previous value.
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - NETWORK SETTING - IP ADDR. SETTING
Default Gateway* If a router is used on the network, sets the router’s address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
Note:
If the specified router address is outside of the allowable range, the value is not changed,
even after the Apply button is clicked. The setting returns to the previous value.
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - NETWORK SETTING - IP ADDR. SETTING
Domain Name Automatic
Acquisition Select whether or not the default DNS domain name is automatically acquired from the
DHCP server to overwrite the current setting.
Choices: Enable, Disable
Default: Enable
DNS Server Automatic
Acquisition Select whether or not the DNS server address is automatically acquired from the DHCP
server to overwrite the current setting.
Choices: Enable, Disable
Default: Enable
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
* Always enter these addresses without leading zeros. For example, 131.011.010.001 should be entered as 131.11.10.1.
IPv6 Settings
For more information on these TCP/IP, see Chapter 5 “Network Printing” on page 61.
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 157