Epson AcuLaser CX37DNF - Manual (Page 178)

Item Description
Trap Settings Allow Setting Specifies whether or not to permit the Trap settings
Choices: Allow, Restrict
Default: Allow
Trap Setting
When
Authentication
Fails Specifies whether to enable or disable the Trap settings when authentication
failed.
Choices: Enable, Disable
Default: Disable
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
AppleTalk
Item Description
AppleTalk If Enable is selected, AppleTalk is enabled.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - NETWORK SETTING - APPLETALK
Printer Name Sets the printer name.
Range: 1 to 31 bytes
Default: AL-CX37-xxxxxx
Note:
xxxxxx displays six last digits of the MAC address in hexadecimals.
Zone Name Sets the Zone Name.
Range: 1 to 31 bytes
Default: *
Current Zone Name Identifies the current zone name.
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 178