Epson AcuLaser CX37DNF - Manual (Page 156)

Item Description
SLP Select whether or not SLP is used.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - NETWORK SETTING - SLP
LLMNR Select whether or not LLMNR is used.
Choices: Enable, Disable
Default: Enable
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
IPv4 Settings
For more information on these TCP/IP, see Chapter 5 “Network Printing” on page 61.
Item Description
Auto IP Specifies the automatic assigning method for the printer IP address.
Choices: DHCP, BootP, ARP/PING
Note:
You can select multiple items from the available choices.
Default: DHCP
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - NETWORK SETTING - DHCP, BOOTP, ARP/PING
IP Address* Sets the printer’s IP address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
Note:
If the specified IP address is outside of the allowable range, the value is not changed, even
after the Apply button is clicked. The setting returns to the previous value.
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - NETWORK SETTING - IP ADDR. SETTING
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 156