Epson AcuLaser CX37DNF - Manual (Page 189)

IEEE802.1x
Item Description
IEEE802.1x Select whether to enable or disable the IEEE802.1x function.
Choices: Enable, Disable
Default: Disable
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - NETWORK SETTING - IEEE802.1X
EAP Type Select the type of authentication used with IEEE802.1x.
Choices: None, EAP-MD5, EAP-TLS, EAP-TTLS, PEAP, LEAP, Server Specification
Default: None
User ID Specifies the account name, when EAP Type is set to EAP-MD5, EAP-TLS,
EAP-TTLS, PEAP, LEAP or Server Specification.
Range: Up to 128 bytes
Password Specifies the password, when EAP Type is set to EAP-MD5, EAP-TLS, EAP-TTLS,
PEAP, LEAP or Server Specification.
Range: Up to 128 bytes
TTLS Anonymous Name Specify the logon name used with EAP-TTLS primary authentication. Specifies the
TTLS anonymous name, when EAP Type is set to EAP-TTLS or Server
Specification.
Range: 1 to 128 bytes
Default: anonymous
Note:
If EAP Type is set to Server Specification while the actual authentication method
is EAP-MD5, type in the same name as the User ID.
TTLS Authentication Type Specify the EAP-TTLS phase 2 authentication procedure. Specifies the TTLS
anonymous type, when EAP Type is set to EAP-TTLS or Server Specification.
Choices: PAP, MS-CHAP, MS-CHAPv2
Default: MS-CHAPv2
Server Certificate Check Specify the items where the server certificate is verified. Specifies the server
certificate check, when EAP Type is set to EAP-TLS, EAP-TTLS or PEAP.
Choices: Validity, CA Chain, Server ID
Note:
You can select multiple items from the available choices.
Default: Validity
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 189