Epson AcuLaser CX37DNF - Manual (Page 124)

Item Description
Tray2 Paper Size Specifies the setting for the size of paper loaded into Tray 2.
Default: A4
Configuration Menu Equivalent:
UTILITY
- PAPER SETUP - TRAY2 PAPER
Width Specifies the paper width when Paper Size is set to Custom
Size.
Range: 3.63 - 8.50 (inch) / 92 - 216 (mm)
Configuration Menu Equivalent:
UTILITY
- PAPER SETUP - TRAY2 PAPER
Length Specifies the paper length when Paper Size is set to Custom
Size.
Range: 5.83 - 11.69 (inch) / 148 - 297 (mm)
Configuration Menu Equivalent:
UTILITY
- PAPER SETUP - TRAY2 PAPER
Paper Type Specifies the setting for the type of paper loaded into Tray 2.
Choices: Plain Paper, Thick 1, Thick 2, Label, Postcard,
Letterhead, Glossy 1, Glossy 2, Single Side Only, Special Paper
Default: Plain Paper
Configuration Menu Equivalent:
UTILITY
- PAPER SETUP - TRAY2 PAPER
Tray3
This item appears only if an op-
tional 500-sheet paper cassette
unit is installed.
Paper Size Displays the setting for the size of paper loaded into Tray 3.
Paper Type Specifies the setting for the type of paper loaded into Tray 3.
Choices: Plain Paper, Single Side Only, Special Paper
Default: Plain Paper
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 124