Epson AcuLaser CX37DNF - Manual (Page 122)

Item Description
Copies Specifies the default setting for number of copies to be printed.
Range: 1-9999
Default: 1
Configuration Menu Equivalent:
PS/PCL PRINT
- PAPER MENU - COPIES
Paper Size Specifies the default setting for the size of paper.
Configuration Menu Equivalent:
PS/PCL PRINT
- SYS DEFAULT MENU - PAPER - DEFAULT PAPER - PAPER SIZE
Width Specifies the paper width when Paper Size is set to Custom Size.
Range: 3.63 - 8.50 (inch) / 92 - 216 (mm)
Configuration Menu Equivalent:
PS/PCL PRINT
- SYS DEFAULT MENU - PAPER - DEFAULT PAPER - CUSTOM SIZE -
WIDTH
Length Specifies the paper length when Paper Size is set to Custom Size.
Range: 5.83 - 14.00 (inch) / 148 - 356 (mm)
Configuration Menu Equivalent:
PS/PCL PRINT
- SYS DEFAULT MENU - PAPER - DEFAULT PAPER - CUSTOM SIZE -
LENGTH
Paper Type Specifies the default setting for the type of paper.
Choices: Plain Paper, Recycled, Thick 1, Thick 2, Label, Envelope, Postcard,
Letterhead, Glossy 1, Glossy 2, Single Side Only, Special Paper
Default: Plain Paper
Configuration Menu Equivalent:
PS/PCL PRINT
- SYS DEFAULT MENU - PAPER - DEFAULT PAPER - PAPER TYPE
Collate If On is selected, all pages in a copy of the document can be printed before
printing the next copy.
If Off is selected, all copies of the document are not printed separately.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
PS/PCL PRINT
- PAPER MENU - COLLATE
Note:
This menu item appears only if an optional hard disk drive is installed.
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 122