Epson AcuLaser CX37DNF - Manual (Page 166)

Item Description
Port Number Specify the port number of the LDAP server.
Range: 1 to 65535
Default: 389
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - LDAP SETTING - LDAP PORT NO.
Enable SSL Select whether SSL is enabled or disabled.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - LDAP SETTING - SSL SETTING
Port Number(SSL) Specify the port number of the LDAP server when SSL is used.
Range: 1 to 65535
Default: 636
Search Base Specify the search starting point in a hierarchical structure arranged on the LDAP server.
Range: Up to 64 characters
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - LDAP SETTING - SEARCH BASE
Attribute Specify the attribute that acquires.
Range: Up to 32 characters
Default: cn
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - LDAP SETTING - ATTRIBUTE
Search Method The specified characters can be searched for at the beginning, within or at the end.
Choices: Begin, Contain, End
Default: Contain
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - LDAP SETTING - SEARCH METHOD
Timeout Specify the maximum wait time during a search.
Range: 5 to 300
Default: 60
Configuration Menu Equivalent:
UTILITY
- ADMIN. MANAGEMENT - LDAP SETTING - LDAP TIMEOUT
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 166