Epson AcuLaser CX37DNF - Manual (Page 121)

Local Interface
Item Description
I/O Timeout Specifies the reception timeout (in seconds).
Range: 5-300
Default: 15
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Default Settings
General Settings
Item Description
PDL Selects default language to be selected.
Choices: Auto, PCL, PS
Default: Auto
Configuration Menu Equivalent:
PS/PCL PRINT
- SYS DEFAULT MENU - EMULATION - DEF. EMULATION
Paper Source The paper tray that is normally used can be specified.
Choices: Tray1, Tray2, Tray3
Default: Tray2
Note:
Tray3 appears only if an optional 500-sheet paper cassette unit is installed.
Duplex If Long-Edge Binding is selected, the pages will be printed on both sides of the
paper for long-edge binding.
If Short-Edge Binding is selected, the pages will be printed on both sides of the
paper for short-edge binding.
Choices: Off, Short-Edge Binding, Long-Edge Binding
Default: Off
Configuration Menu Equivalent:
PS/PCL PRINT
- PAPER MENU - DUPLEX
Output Tray Displays the name of the output tray.
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 121