SMA SB 2000HF-30 Installation - Manual (Page 51)

SMA Solar Technology AG Commissioning
Installation Manual SB20HF-30HF-IA-en-32 51
7.2 Display Messages During the Startup Phase
• Firstly, the firmware version of the internal
processors appears in the text lines.
• After an interval of 5 seconds, or after tapping on
the enclosure lid, the serial number (or the
description of the inverter) and the NET ID for
communication via Bluetooth will appear. The
description of the inverter can be changed with a
communication product.
• After a further 5 seconds, or when you tap again,
the configured standard is displayed ‚
(example: "VDE0126‑1‑1").
• After a further 5 seconds, or when you tap again,
the configured language is displayed
(example: "Sprache Deutsch" (Language German)).
• During normal operation, the text line of the display will subsequently be clear. For more
information on the possible event messages in the scrolling lines and their meaning, see
section 10 "Messages" (page 65).
Illustrated display messages
The display messages illustrated in this section serve as examples and can, depending on
the country setting, differ from the display messages of your inverter.
Show display messages again (valid from firmware version 2.30)
If you want to view the display messages of the startup phase again while in normal
operation, double tap the enclosure lid.