SMA SB 2000HF-30 Installation - Manual (Page 50)

Commissioning SMA Solar Technology AG
50 SB20HF-30HF-IA-en-32 Installation Manual
13. Check whether the display and LEDs are indicating a normal operating state.
☑ If the inverter has been commissioned successfully, the green LED should be glowing or flashing,
provided there is sufficient solar irradiation. To find out what a glowing red LED and the event
numbers on the display mean, refer to section 10.3 "Error Messages" (page 66).
14. For communication via Bluetooth, make the following settings using Sunny Explorer:
– Change the plant time (see Sunny Explorer manual).
– Change the plant password (see Sunny Explorer manual).
LED Color Significance
A Green Glowing: operation
Flashing: wait for sufficient
irradiation
B Red Disturbance
C Blue Bluetooth communication is
active