2 interior view of the quick module, 3 configuring the inverter via the quick module, Interior view of the quick module – SMA SB 2000HF-30 Installation User Manual
Page 22: Configuring the inverter via the quick module
The Communication Module (Quick Module)
SMA Solar Technology AG
22
SB20HF-30HF-IA-en-32
Installation Manual
5.2 Interior View of the Quick Module
5.3 Configuring the inverter via the Quick Module
There are two ways to configure the inverter to the required country standard:
• Before commissioning, you can configure the inverter using the two rotary switches in the
Quick Module (switches A and B).
• You can adjust the parameters "CntrySet" or "Set country standard" using an external
communication product with a Bluetooth interface.
Object
Description
A
Rotary switch for setting the country standard (switch A)
B
Rotary switch for setting the display language (switch B)
C
Rotary switch for the configuration of Bluetooth communication (switch C)
D
Slot for SD card (for service purposes only)
E
Jumper slot for setting the language to English (e)
Alternative parameterization with RS485
If your inverter is fitted with a Quick Module with RS485 interface, then your inverter can
also communicate via RS485.