SMA SB 2000HF-30 Installation - Manual (Page 29)

SMA Solar Technology AG The Communication Module (Quick Module)
Installation Manual SB20HF-30HF-IA-en-32 29
Procedure
1. Open the Quick Module, as described in section 5.3.3 "Opening the Quick Module"
(page 27).
2. Set the arrow on the rotary switch (C) to the
required position using a screwdriver (2.5 mm). For
this purpose, use a screwdriver with a blade width
of 2.5 mm.
5.3.6 Closing the Quick Module
1. Close the lid of the Quick Module and flip the flap
down again until it locks into place.
☑ You can now connect the Quick Module to the inverter, as described in the following section.
Plant password for user and installer
If you communicate via Bluetooth, you can protect the inverter with 1 plant password for
the user and 1 plant password for the installer. All inverters are delivered with the same
factory‑installed plant password. You must change plant passwords using a communication
product in order to protect the plant from unauthorized access.
If you do not communicate using Bluetooth, deactivate the Bluetooth communication. This
protects your plant from unauthorized access.
Changing the Plant Time
For communication via Bluetooth and Sunny Explorer, you must change the plant time
(date and time) using a communication product after commissioning. This prevents errors
when retrieving saved events.
Acceptance of settings
The Bluetooth settings will first be accepted upon commissioning.