SMA SB 2000HF-30 Installation - Manual (Page 34)

The Communication Module (Quick Module) SMA Solar Technology AG
34 SB20HF-30HF-IA-en-32 Installation Manual
5.6 Disassembling the Quick Module
1. Disconnect the inverter from the AC and DC side as described in section 8 "Disconnecting the
Inverter from Voltage Sources" (page 58).
2. Pull the Quick Module out over the first stopper to
the last stopper.
3. Press the Quick Module lightly upwards until the
keys pass through the openings of the retainer.
4. Carefully take the Quick Module out of the retainer.
☑ The Quick Module is disassembled.