beautypg.com

SMA SI 4548-US User Manual

Page 44

background image

6  Electrical Connection

SMA America, LLC

44

SI4548-6048-US-BE-en-20

Operating Manual

Risk of injury due to short-circuit currents
Short-circuit currents in the battery can cause heat build-up and electric arcs. Burns or eye injuries
due to flashes may result.

• Remove watches, rings, and other metal objects.
• Use insulated tools.
• Do not place tools or metal parts on the battery.

Danger to life due to incompatible lithium-ion battery
An incompatible lithium-ion battery can lead to a fire or an explosion. Use of incompatible
lithium-ion batteries can also make the user’s battery management system unsafe, and void
manufacturers’ warranties. To avoid fire or explosion, we strongly recommend doing the following:

• Verify that the battery complies with locally applicable standards and directives, and is

intrinsically safe.

• Verify that the particular lithium-ion battery type is approved for use with the SMA Sunny

Island inverter (please see “List of Approved Lithium-Ion Batteries” under the Technical
Information tab at www.SMA-America.com).

• If manufacturer approved Sunny Island lithium-ion batteries are not available, you may use

lead acid batteries.

Ampacity of lithium-ion batteries in off-grid systems
In order to meet the requirements of off-grid systems, the Sunny Island has a high overload
capacity. This overload capacity requires the battery to supply sufficient current. With lithium-ion
batteries, this ampacity cannot be taken for granted.

• Check with the battery manufacturer whether the battery is suitable for off-grid systems

with Sunny Island inverters. Pay special attention to the ampacity.

Lithium-ion batteries on the Sunny Island require firmware version 7.3
When using lithium-ion batteries on the Sunny Island, the firmware version must be at least 7.3.

• Before connecting a lithium-ion battery to the Sunny Island, check whether the

Sunny Island has at least firmware version 7.3.

• If the Sunny Island has an older firmware version, update the firmware (see Section 11.6

"Firmware Update", page 98).

This manual is related to the following products: