SMA SB 3600SE-10 - Manual (Page 56)

18. Ensure that no voltage is present on the
AC connecting terminal plate between L and PE
using a suitable measuring device. Insert the test
probe into each round opening of the terminal.
19. If you are using the multifunction relay, ensure that no voltage is present between any of the
terminals on the multifunction relay and PE on the AC connecting terminal plate.
20.
Damage to the inverter due to electrostatic discharge
Touching electronic components can cause damage to or destroy the inverter through
electrostatic discharge.
• Ground yourself before touching any component.
10 Disconnecting the Inverter from Voltage Sources SMA Solar Technology AG
Operating Manual SB36-50SE-BE-en-11 56