SMA SB 3600SE-10 - Manual (Page 15)

Symbol Explanation
Danger
This symbol indicates that the inverter must be additionally grounded if
additional grounding or equipotential bonding is required at the installa-
tion site (see Section 6.2.3 "Connecting Additional Grounding", page
31).
Danger to life due to electric shock
The product operates at high voltages. All work on the product must be
carried out by qualified persons only.
Risk of burns from hot surfaces
The product can get hot during operation. Avoid contact during opera-
tion. Allow the product to cool down sufficiently before carrying out any
work.
Observe the documentation.
Observe all documentation supplied with the product.
Direct current
The product does not have a transformer.
Alternating current
WEEE designation
Do not dispose of the product together with the household waste but in
accordance with the locally applicable disposal regulations for electronic
waste.
VDE certification mark
The inverter and the Battery Pack are VDE-tested and comply with the cur-
rent health and safety requirements. The inverter also complies with the
requirements of the German Equipment and Product Safety Act.
Danger to life due to high voltages in the inverter; observe the prescribed
waiting time of five minutes.
High voltages that can cause lethal electric shocks are present in the live
components of the inverter. Prior to performing any work on the inverter,
disconnect it from all voltage sources as described in this document (see
Section 10, page 54).
4 Product Description SMA Solar Technology AG
Operating Manual 15 SB36-50SE-BE-en-11