SMA SB 3600SE-10 - Manual (Page 38)

8.
Danger of crushing if the Battery Pack is moved to its end position on the wall
mounting bracket with a jerk
• Grip the Battery Pack by the handles and
push it to the right as far as it will go.
9. Position the protective cover over the
Battery Pack. The tabs on the right-hand side of
the protective cover must engage with the guides
on the left of the inverter enclosure. Finally, press
the left side of the protective cover down onto
the Battery Pack until it snaps into place.
6 Electrical Connection SMA Solar Technology AG
Operating Manual SB36-50SE-BE-en-11 38