SMA SB 3600SE-10 - Manual (Page 46)

8.4 Creating a Sunny Portal System
Registration data for detecting the inverter in Sunny Portal
To detect the inverter in Sunny Portal, you will need the registration data. The registration data,
PIC and RID are to be found on the supplementary sheet with information on SMA
Speedwire/Webconnect or on the additional label on the inverter.
• Keep the registration data in readiness.
To monitor the PV system or visualize PV system data in Sunny Portal, you will need to register in
Sunny Portal as a user and create the system in Sunny Portal. Depending on the structure of the
systems, you may need to create different systems in Sunny Portal.
Procedure:
• If you are operating an Integrated Storage System, create a Sunny Home Manager system in
Sunny Portal.
• If you are operating the Sunny Boy Smart Energy and the SMA Energy Meter without Sunny
Home Manager, create a Webconnect system in Sunny Portal.
Creating a Sunny Home Manager System in Sunny Portal
1. If you are not registered as a user in Sunny Portal, use the PV System Setup Assistant to
register (see user manual "Sunny Home Manager in Sunny Portal" at www.SunnyPortal.com).
2. If you are already registered as a user in Sunny Portal, log in as an existing user.
3. Create a Sunny Home Manager system in Sunny Portal or add the inverter and the SMA
Energy Meter to an existing Sunny Home Manager system (see the User Manual "
Sunny Home Manager in Sunny Portal" at www.SunnyPortal.com). Do not exceed the
maximum number of devices permitted in a Sunny Home Manager system.
4. Configure the energy meter (see the User Manual "Sunny Home Manager in Sunny Portal" at
www.SunnyPortal.com).
Creating a Webconnect System in Sunny Portal
1. If you are not registered as a user in Sunny Portal, use the PV System Setup Assistant to
register (see user manual "Webconnect Systems in Sunny Portal" at www.SunnyPortal.com).
2. If you are already registered as a user in Sunny Portal, log in as an existing user.
3. Create a Webconnect system in Sunny Portal or add the inverter and the SMA Energy Meter
to an existing Webconnect system (see the User Manual "Webconnect Systems in
Sunny Portal" at www.SunnyPortal.com). Do not exceed the maximum number of devices
permitted in a Webconnect system.
8.5 Changing Operating Parameters
This section describes the basic procedure for changing operating parameters. Always change
operating parameters as described in this section. Some function-sensitive parameters can only be
viewed and changed by qualified persons (for further information on changing parameters, refer to
the Sunny Explorer manual).
8 Configuration SMA Solar Technology AG
Operating Manual SB36-50SE-BE-en-11 46