HEIDENHAIN IK 5294 - Manual (Page 86)

66 QC5200 Series User’s Guide
Applying feature tolerances
A detailed description of applying tolerances to features is provided by Chapter 6: Tolerancing. Circular-
ity tolerances will be applied to the three circles. The
tolerance result data will be collected automatically by
the TolRep (Tolerance Report) template, which will be
printed later.
Select the features and then select the tolerance type.
Enter the tolerance data into the Tolerance Entry dialog box and click OK. The tolerance results will be
displayed in the Tolerance Results dialog box and in the feature lists. Click OK to complete applying
tolerances.
Select the three circles... right-click the Results window and select the
tolerance type
Enter the tolerance data... to display tolerance results in the Tolerance Results dialog box
and in feature lists
3 Quick start demo OE.indd 8 5/9/2005 9:43:16 AM