HEIDENHAIN IK 5294 - Manual (Page 85)

65
3
Quick Start
Demonstration
Measuring features
A detailed description of measuring features is provided by
Chapter 5: Measuring. In this example, the perimeter and the three holes
of the QC Quickie slide will be measured.
Measure the perimeter starting with the arc in the top left corner of the
part.
Continue measuring perimeter features in a clockwise direction until the
entire slide perimeter is measured, and then measure the three holes.
The final measurement steps are shown in the Program template
window.
Click the Measure Arc
toolbar button...
probe points and click OK... to complete the arc
measurement
Click the Measure Circle
toolbar button...
probe points of the three
holes and click OK...
to complete the feature
measurements
Measuring Features
3 Quick start demo OE.indd 7 5/9/2005 9:43:15 AM