HEIDENHAIN IK 5294 - Manual (Page 310)

290 QC5200 Series User’s Guide
Problem
An axis count value is wrong
Probable cause
• The resolution setting is incorrect
Recommended solution
• Use the Tools/Options/Encoder tab to enter
the correct encoder resolution.
Problem
An axis counts in the wrong direction
Probable cause
• The polarity (reversed) setting is incorrect
Recommended solution
• Use the Tools/Options/Encoder tab to enter
the correct encoder polarity by changing the
Reverse setting.
Enter
resolutions
Reverse
encoder
polarities
11 Problem solving OE.indd 4 5/9/2005 10:05:38 AM