HEIDENHAIN IK 5294 - Manual (Page 284)

264 QC5200 Series User’s Guide
Displaying parts and probe position
Use the part view screen to configure the default
displays of parts, video probes and touch probes.
The default pixel size of constructed points and
feature selection zones are also configured in the
part view screen.
Click the Tools/Options/Part View menu item to
display the Part View screen.
Specifying the point feature size
The default point feature size shown in the Part View window during pro-
gram execution can be specified in pixels. Enter the desired pixel size for
displaying point features into the Point feature size (pixels) field.
Specifying feature selection zones size
The feature selection zone is the circular area around the tip of the arrow cursor. Features
are recognized by the QC5200 system only within this area. Increasing the diameter of
the selection zone makes feature selection less sensitive, but increases the danger of acci-
dentally selecting multiple features. Decreasing the diameter of the selection zone reduces
the danger of accidentally selecting multiple features, but increases the difficulty of selecting an individual
feature.
Enter the desired selection zone size into the Feature selection...
data field.
10 Supervisor setup OE.indd 24 5/9/2005 10:04:11 AM