HEIDENHAIN IK 5294 - Manual (Page 286)

266 QC5200 Series User’s Guide
Displaying only features
To display selected features without numbers or names on the part view screen:
1 Close the Part View Options screen, highlight and right-click
the desired features, and then click Feature Properties. The Feature
Properties window will be displayed.
2 Clear the Show Name box,
and then click OK.
Only the selected features will be
shown on the part view screen,
without numbers or names, re-
gardless of settings in the Part
View options screen.
Displaying features with numbers
To display selected features with numbers on the part view screen:
1 Close the Part View Options screen, highlight and right-click
the desired features, and then click Features Properties. The Feature
Properties window will be displayed.
2 Check the Show Name box
and then click OK.
3 Reopen the Part View Op-
tions screen and check the Display
a feature numbers... box.
Selected features will be displayed with a feature numbers on the Part
View screen.
10 Supervisor setup OE.indd 26 5/9/2005 10:04:17 AM