HEIDENHAIN IK 5294 - Manual (Page 55)

35
2
User Interface
Joystick
The Joystick functions control the resolution of joystick motion, limit
motion to a single axis and enable/disable automatic part following
when part alignment has been performed.
These joystick functions are not included in part programs, but are
typically used by the operator during programming sessions or program
execution. Detailed descriptions of the joystick functions are contained
in Chapter 8: Programming.
Motors off
Checking the Motors Off menu item disables CNC motor operation.
Clicking the Motors Off menu item toggles the check mark on and off.
Programming functions
Programming functions are used during programming sessions, program
execution, for program editing and for program troubleshooting. The
programming functions are described in detail in
Chapter 8: Programming.
Setup functions
The Customize, Options and CNC menu items provide access to the
supervisor setup functions that are used to configure most operating
characteristics of the QC5200 system. The supervisor setup functions
are explained in detail in Chapter 10: Supervisor setup.
CAUTION
Changing setup functions may significantly impact
the accuracy and reliability of your QC5200 system.
These setup functions should be used only by techni-
cally qualified supervisors, OEMs and Metronics dis-
Setup
functions
QC5200 Menubar Menus
2 User Interface OE.indd 31 5/9/2005 9:40:13 AM