HEIDENHAIN iTNC 530 (340 49x-03) smarT.NC Pilot - Manual (Page 41)

41
D
e
fining Machining O
p
erations
Tool selection
As soon as an input field in the tool selection is active, you can choose
via the TOOL NAME soft key if you want to enter the tool number or tool
name.
There is also a SELECT soft key for calling a window from which you can
select a tool defined in the tool table TOOL.T. smarT.NC then
automatically writes the tool number or name of the selected tool into the
corresponding input field.
You can also edit the displayed tool data:
8 Use the arrow keys to select the line and then the column of the value
to be edited: The light-blue background marks the editable field
8 Set the EDIT soft key to ON, enter the desired value and confirm with
the ENT key.
8 If needed, select further columns and repeat the described procedure