HEIDENHAIN iTNC 530 (340 49x-03) smarT.NC Pilot - Manual (Page 144)

144
Defining
Con
to
u
rs
The different colors of the displayed contour elements indicate their
validity:
Selecting from multiple possible solutions
If incomplete entries lead to multiple theoretically possible solutions,
then (with graphic support) you can select the correct solution via soft
key:
8 Show the possible solutions.
8 Enter the displayed solution in the part program.
8 Enter data for subsequent contour elements.
8 Graphically display the next programmed block.
Blue The contour element is fully defined.
Green The entered data describe a limited number of possible
solutions: select the correct one.
Red The entered data are not sufficient to determine the
contour element: enter further data.