HEIDENHAIN iTNC 530 (340 49x-03) smarT.NC Pilot - Manual (Page 131)

131
Defining
Mach
ining
Posit
io
ns
Pattern, straight, rotated or distorted
8 Starting point 1st axis: Coordinate of the starting point
of the pattern ( 1 ) in the major axis of the working plane.
8 Starting point 2nd axis: Coordinate of the starting point
of the pattern ( 2 ) in the minor axis of the working plane.
8 Distance in 1st axis: Distance of the machining positions
in the major axis of the working plane. You can enter a
positive or negative value.
8 Distance in 2nd axis: Distance of the machining positions
in the minor axis of the working plane. You can enter a
positive or negative value.
8 Number of lines: Total number of rows in the pattern.
8 Number of columns: Total number of columns in the pattern.
8 Rotation: Angle of rotation by which the entire pattern is
rotated around the entered starting point. Reference axis:
Major axis of the active machining plane (e.g. X for tool axis
Z). You can enter a positive or negative value.
8 Rotary pos. ref. ax.: Angle of rotation around which only
the major axis of the machining plane is distorted around the
entered starting point. You can enter a positive or negative
value.
8 Rotary pos. minor ax.: Angle of rotation around which only
the minor axis of the machining plane is distorted around the
entered starting point. You can enter a positive or negative
value.
The Rotary pos. ref. ax. and Rotary pos. minor ax.
parameters are added to a previously performed rotation of
the entire pattern.