HEIDENHAIN iTNC 530 (340 49x-03) smarT.NC Pilot - Manual (Page 130)

130
Defining
Mach
ining
Posit
io
ns
Single point, Cartesian
8 X: Coordinate in the reference axis of the working plane
8 Y: Coordinate in the minor axis of the working plane
Single row, straight or arced
8 Starting point 1st axis: Coordinate of the starting point
of the row in the reference axis of the working plane.
8 Starting point 2nd axis: Coordinate of the starting point
of the row in the minor axis of the working plane.
8 Distance: Distance between the machining positions. You
can enter a positive or negative value.
8 Number of repetitions: Total number of machining
positions.
8 Rotation: Angle of rotation around the entered starting
point. Reference axis: Major axis of the active machining
plane (e.g. X for tool axis Z). You can enter a positive or
negative value.