HEIDENHAIN iTNC 530 (340 49x-03) smarT.NC Pilot - Manual (Page 149)

149
P
roce
ssing
DXF
Files
(Sof
tware
Op
ti
on
)
Starting the DXF converter from a form
8 Select the smarT.NC operating mode.
8 Select any machining step for which contour programs or
point files are necessary.
8 Select the input field in which the name of the contour
program or point file is to be defined.
8 To start the DXF converter: Press the SHOW DXF soft
key. smarT.NC opens a pop-up window with available DXF
files. If necessary, select the directory in which the DXF file
to be opened is saved. Select one of the displayed DXF files
and confirm your selection with the ENT key or the OK
button. The TNC starts the DXF converter, with which you
select the desired contour or positions, and can save the
contour name or the name of the point file directly in the
form (see ”Processing DXF Files (Software Option)” on
page 147).