HEIDENHAIN TNC 128 (77184x-01) - Manual (Page 43)

HEIDENHAIN TNC 128 43
1
.3 Pr
ogr
amming the first par
t
 Move the tool to workpiece depth: Press the orange Z
axis key and enter the value for the position to be
approached, e.g. –5. Confirm with the ENT key
 Confirm Radius comp.: R+/R–/no comp? by pressing
the ENT key: Do not activate the radius compensation
 Feed rate F=? Enter the positioning feed rate, e.g.
3000 mm/min and confirm with the ENT key
 Miscellaneous function M? Switch on the spindle and
coolant, e.g. M13. Confirm with the END key: The TNC
saves the entered positioning block
 Approach contour point 1 : Press the orange X axis key
and enter the value 5 for the position to be
approached
 Tool radius comp: R+/R–/no comp? Select the R– soft
key: The traverse path is decreased by the tool radius
 Feed rate F=? Enter the machining feed rate, e.g. 700
mm/min, and confirm your entry with the END key
 Approach contour point 2 : Press the orange Y axis key
and enter the value 95 for the position to be
approached
 Tool radius comp: R+/R–/no comp? Select the R+ soft
key: The traverse path is increased by the tool radius.
Confirm your entry with the END soft key
 Approach contour point 3 : Press the orange X axis key
and enter the value 95 for the position to be
approached
 Tool radius comp: R+/R-/no comp? Select the R+ soft
key: The traverse path is increased by the tool radius.
Confirm your entry with the END soft key
 Approach contour point 4 : Press the orange Y axis key
and enter the value 5 for the position to be
approached
 Tool radius comp: R+/R-/no comp? Select the R+ soft
key: The traverse path is increased by the tool radius.
Confirm your entry with the END soft key