HEIDENHAIN TNC 128 (77184x-01) - Manual (Page 355)

HEIDENHAIN TNC 128 355
14.5 Ether
n
et int
e
rf
ace
NFS option rsize : Packet size in bytes for data reception
wsize : Packet size for data transmission in bytes
time0= : Time in tenths of a second, after which
the control repeats an unanswered Remote
Procedure Call.
soft : If YES is entered, the Remote Procedure
Call is repeated until the NFS server answers. If
NO
is entered, it is not repeated.
SMB option Options that concern the SMB file system type:
Options are given without space characters,
separated only by commas. Pay attention to
capitalization.
Options:
ip : IP address of the Windows PC to which the
control is to be connected
username : User name with which the control
should log in
workgroup : Workgroup under which the control
should log in
password : Password with which the control is to
log on (up to 80 characters)
Further SMB options: Input of further options
for the Windows network
Automatic
connection Automount (YES or NO): Here you specify
whether the network will be automatically
mounted when the control starts up. Devices
that are not automatically mounted can be
mounted anytime in the program management.
You do not need to indicate the protocol with the TNC 128.
It uses the communications protocol according to RFC
894.
Setting Meaning