HEIDENHAIN TNC 128 (77184x-01) - Manual (Page 337)

HEIDENHAIN TNC 128 337
13.5 Pr
ogr
am r
u
n Returning to the contour
With the RESTORE POSITION function, the TNC returns to the
workpiece contour in the following situations:
 Return to the contour after the machine axes were moved during a
program interruption that was not performed with the INTERNAL
STOP function
 Return to the contour after a block scan with RESTORE POS AT N,
for example after an interruption with INTERNAL STOP
 Depending on the machine, if the position of an axis has changed
after the control loop has been opened during a program interruption
Returning to the contour:
 Press the RESTORE POSITION soft key
 Restore machine status, if required
 To move the axes in the sequence that the TNC suggests on the
screen, press the machine START button, or
 To move the axes in any sequence, press the soft keys RESTORE
X, RESTORE Z, etc., and activate each axis with the machine START
button
 To resume machining, press the machine START button