HEIDENHAIN CNC Pilot 4290 Pilot - Manual (Page 38)

38
Figur
es on the
lat
e
ra
l surf
ace
Rectangle on lateral surface G315-Geo
G315 defines a rectangle on the lateral surface.
Parameters
Z, C: Center point of rectangle (position, angle)
CY:
Angle as linear dimension
A: Angle to longitudinal axis of rectangle (reference: Z-axis) – default: 0°
K: Length of rectangle
B: Width (height) of the rectangle
R: Chamfer/rounding - default: 0
■ R>0: Radius of rounding
■ R<0: Width of chamfer
P: Pocket depth – no entry: ”P” from G308
Full circle on lateral surface G314-Geo
G314 defines a full circle on the lateral surface.
Parameters
Z, C: Circle center (position, angle)
CY:
Angle as linear dimension
R: Circle radius
P: Pocket depth – no entry: ”P” from G308