HEIDENHAIN CNC Pilot 4290 Pilot - Manual (Page 37)

37
Linear slot on lateral surface G311-Geo
G311 defines a linear slot on the lateral surface.
Parameters
Z, C: Center point of slot (position, angle)
CY:
Angle as linear dimension
A: Angle to longitudinal axis of slot (reference: Z-axis) – default: 0°
K: Slot length
B: Slot width
P: Pocket depth – no entry: ”P” from G308
Circular groove on lateral surface G312-/G313-Geo
G312/G313 defines a circular slot on the lateral surface.
Parameters
Z, C: Center of curvature of slot (position, angle)
CY:
Angle as linear dimension
R: Curvature radius (reference: center point path of the slot)
A: Angle of slot starting point (reference: Z axis)
W: Angle of slot end point (reference: Z axis)
B: Slot width
P: Pocket depth – no entry: ”P” from G308
Example: G312-Geo
Figur
es on the
lat
e
ra
l surf
ace