HEIDENHAIN PT 855 for Turning - Manual (Page 67)

II - 3 Encoders and Measured Value Display
POSITIP 855 Technical Information 69
Definition of the coordinate axes: P 48.*
Do not display axis off: P 48.* = 0
Display axis on: P 48.* = 1
You can define separately for each axis whether the encoder sig-
nals are counted positive or negative in positive direction of
traverse.
Counting direction of the encoder signals: P 30.*
Positive counting direction: P 30.* = 0
Negative counting direction: P 30.* = 1
Monitoring of encoder:
•
cable and connectors
• traversing speed
• measuring signals
Encoder monitoring: P 45.*
Encoder monitoring off: P 45.* = 0
Encoder monitoring on: P 45.* = 1
Adapting the encoders