Enterasys Networks Enterasys Matrix 6H303-48 - Manual (Page 88)

Memory Locations and Replacement Procedures
B-8 Mode Switch Bank Settings and Optional Installations
Installing the DIMM on 4G4202-72 or 4G4282-49
To install a DIMM, refer to Figure B‐8 and proceed as follows:
1. Push the connector arms away from the DIMM enough to insert the DIMM into the
connector contacts.
2. Insert the DIMM straight down between the connector contacts enough for the tabs
on the connector arms to align with the two DIMM alignment notches.
3. Push the DIMM down into the connector contacts, then rotate the two connector arms
toward the DIMM to lock it into place.
Figure B-8 Installing the DIMM on 4G4202-72 or 4G4282-49
Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive
electronic equipment.
Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones
de seguridad para evitar descargas de electricidad estática.
1 DIMM Connector arms 3 Connector contacts
2 DIMM 4 DIMM alignment notches (2)
Б
В
Г
А
Г
А