Enterasys Networks Enterasys Matrix 6H303-48 - Manual (Page 49)

Connecting to the Network
Matrix DFE-Gold Series Installation Guide 3-17
Figure 3‐10 for four‐wire RJ45 connections. Refer to Figure 3‐11 and Figure 3‐12
for eight‐wire RJ45 connections.
e. Ensure that the twisted pair connection meets the dB loss and cable specifications
outlined in the Cabling Guide. Refer to “
Related Documents ” on page xiv for
information on obtaining this document. If a link is still not established, contact
Enterasys Networks. Refer to “
Getting Help ” on page 1‐8 for details.
4. Repeat steps 1 through 3 above, until all connections have been made.
Figure 3-8 Connecting a Twisted Pair Segment to the DFE-Gold Module
1 RJ45 connector 3 Transmit status (TX) LED 5 GROUP SELECT button
2 RJ45 port connector (port 1) 4 Receive status (RX) LED
COM
OFFLINE/
RESET
GROUP 3
GROUP 1 GROUP 2
CPU
MGMT
1X
6X
4G4202-72
Gb ENET
Â
GROUP
1 2 3
GROUP
SELECT
24X
DFE Д
Г
Б
А