Enterasys Networks Enterasys Matrix 6H303-48 - Manual (Page 26)

Connectivity
1-6 Introduction
Connectivity
4G4202-72
The 4G4202‐72 has 10BASE‐T/100BASE‐TX/1000BASE‐T compliant ports through 72,
fixed RJ45 front panel connectors.
4G4282-49
Depending on how the 4G4282‐49 ( Figure 1‐1 ) is configured, it can support up to
• 48, 10BASE‐T/100BASE‐TX/1000BASE‐T switched ports connected through 48, fixed
RJ45 front panel connectors, or
• 48, 10BASE‐T/100BASE‐TX/1000BASE‐T switched ports plus an optional Gigabit
expansion uplink module.
Management
Management of the module can be either in‐band or out‐of‐band. In‐band remote
management is possible using Telnet, Enterasys Networks’ NetSight
®
management
application, or WebView™ application. Out‐of‐band management is provided through
the RJ45 COM (Communication) port on the front panel using a VT100 terminal or a
VT100 terminal emulator.
Switch Configuration Using WebView
Enterasys Networks’ HTTP‐based Web management application (WebView) is an
intuitive web tool for simple management tasks.
Table 1-1 Optional Ethernet Interface Modules, Compliance, and Physical
Connections
Ethernet Interface Module Compliant to Physical Connection
7G-6MGBIC-A 1-Gigabit Ethernet Six port slots that support optional
hot-swappable Mini-GBICs.
7G-6MGBIC 1-Gigabit Ethernet Six port slots that support optional
hot-swappable Mini-GBICs.