Enterasys Networks Enterasys Matrix 6H303-48 - Manual (Page 41)

Module Placement and Rules
Matrix DFE-Gold Series Installation Guide 3-9
Module Placement and Rules
The DFE‐Gold modules can be installed in a Matrix E7, Matrix N1, Matrix N3, Matrix N5,
or Matrix N7 chassis. The slot locations in the Matrix E7, N3, N5, and N7 chassis are
identified in
Figure 3‐6 along with five module configuration examples.
Figure 3-6 Examples, Slot Numbers/Module Placement in Matrix E7, N3, N5, or N7
To ensure proper operation of the system, consider the following examples and rules for
module placement in either chassis.
Note: It is important to follow the Module Placement and Rules to ensure proper operation.
Caution: Regardless of which chassis is used, the chassis system must be dedicated to
DFE-Gold modules (4xxxxx) only. Do not insert 7xxxxx modules or other legacy modules
into the same chassis with 4xxxxx modules as this will render the chassis inoperable.
Precaución: Cualquiera que sea el chasis que utilice, recuerde que el sistema debe
aplicarse exclusivamente a los módulos DFE (Distributed Forwarding Engine) de la serie
Gold (4xxxxx). No inserte módulos 7xxxxx ni otros módulos legado dentro de un chasis
con módulos 4xxxxx. Si lo hace, el chasis no funcionará.
4XXXXX
1 2 3 4 5 6 7
4XXXXX
7XXXXX
1 2 3 4 5 6 7
4XXXXX
1 2 3 4 5 6 7 1 2 3 4 5 6 7
4XXXXX
A D C B
3
2
1
N3
1 2 3 4 5 6 7
E7 or N7
1
3
4
5
2
N5 POE